{ "layers": [ { "currentVersion": 10.91, "cimVersion": "2.9.0", "id": 0, "name": "Marine Indigenous Protected Areas", "type": "Feature Layer", "description": "This dataset details the Declared Indigenous Protected Areas (IPA) across Australia through the implementation of the Indigenous Protected Areas Programme. These boundaries are not legally binding.\n \nAn Indigenous Protected Area (IPA) is an area of Indigenous-owned land or sea where traditional Indigenous owners have entered into an agreement with the Australian Government to promote biodiversity and cultural resource conservation- making up over a third of Australia's National Reserve System.\n\nFurther information can be found at the website below.\n\nhttp://www.environment.gov.au/indigenous/ipa/index.html \n\nDeclared IPAs in order of gazettal date:\n\nNantawarrina\nPreminghana\nRisdon Cove\nputalina\nDeen Maar\nYalata\nWarul Kawa\nWatarru\nWalalkara\nMount Chappell Island\nBadger Island\nDhimurru\nGuanaba\nWattleridge\nMount Willoughby\nParuku\nNgaanyatjarra\nTyrendarra\nToogimbie\nAnindilyakwa\nLaynhapuy - Stage 1\nNinghan\nNorth Tanami\nWarlu Jilajaa Jumu\nKaanju Ngaachi\nGreat Dog Island\nBabel Island\nlungatalanana\nAngas Downs\nPulu Islet\nTarriwa Kurrukun\nWarddeken\nDjelk\nJamba Dhandan Duringala\nKurtonitj\nFramlingham Forest\nKalka - Pipalyatjara\nBoorabee and The Willows\nLake Condah\nMarri-Jabin (Thamurrurr - Stage 1)\nBrewarrina Ngemba Billabong\nUunguu - Stage 1\nApara - Makiri - Punti\nAntara - Sandy Bore\nDorodong\nWeilmoringle\nYanyuwa (Barni - Wardimantha Awara)\nMinyumai\nGumma\nMandingalbay Yidinji\nSouthern Tanami\nAngkum - Stage 1\nNgunya Jargoon\nBirriliburu\nEastern Kuku Yalanji\nBardi Jawi\nGirringun\nWilinggin\nDambimangari\nBalanggarra\nThuwathu/Bujimulla\nYappala\nWardaman - Stage 1\nKarajarri - Stage 1\nNijinda Durlga - Stage 1\nWarraberalgahl and Porumalgal\nKiwirrkurra\nNyangumarta Warrarn\nMatuwa Kurrara-Kurrara\nKatiti Petermann\nGanalanga-Mindibirrina\nWardang Island", "geometryType": "esriGeometryPolygon", "sourceSpatialReference": { "wkid": 4283, "latestWkid": 4283, "xyTolerance": 8.98315284119521E-9, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -400, "falseY": -400, "xyUnits": 9.999999999999999E8, "falseZ": 0, "zUnits": 1, "falseM": 0, "mUnits": 1 }, "copyrightText": "When using this dataset for analysis or mapping you must always acknowledge the Environment Branch, Indigenous Employment and Recognition Division, Department of the Prime Minister and Cabinet and the Environmental Resources Information Network (ERIN), Department of the Environment (c) Department of the Environment and Department of the Prime Minister and Cabinet, 2016.", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "referenceScale": 0.0, "drawingInfo": { "renderer": { "type": "simple", "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 230, 152, 0, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSNull", "color": [ 230, 152, 0, 255 ], "width": 0 } }, "label": "Marine Indigenous Protected Areas" }, "scaleSymbols": true, "transparency": 0, "labelingInfo": null }, "defaultVisibility": true, "extent": { "xmin": 1.3042559059076574E7, "ymin": -5329211.659337904, "xmax": 1.708395124763135E7, "ymax": -1063770.6728885395, "spatialReference": { "wkid": 102100, "latestWkid": 3857, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -20037700, "falseY": -30241100, "xyUnits": 1.4892314192838538E8, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeAsHTMLText", "displayField": "NAME", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": [ { "name": "COMMENTS", "type": "esriFieldTypeString", "alias": "Comments", "length": 200, "domain": null }, { "name": "LONGITUDE", "type": "esriFieldTypeDouble", "alias": "Longitude", "domain": null }, { "name": "LATITUDE", "type": "esriFieldTypeDouble", "alias": "Latitude", "domain": null }, { "name": "SHAPE_Length", "type": "esriFieldTypeDouble", "alias": "SHAPE_Length", "domain": null }, { "name": "SHAPE_Area", "type": "esriFieldTypeDouble", "alias": "SHAPE_Area", "domain": null }, { "name": "OBJECTID", "type": "esriFieldTypeOID", "alias": "OBJECTID", "domain": null }, { "name": "NAME", "type": "esriFieldTypeString", "alias": "NAME", "length": 60, "domain": null }, { "name": "TYPE", "type": "esriFieldTypeString", "alias": "TYPE", "length": 60, "domain": null }, { "name": "STATE", "type": "esriFieldTypeString", "alias": "STATE", "length": 4, "domain": null }, { "name": "STATUS", "type": "esriFieldTypeString", "alias": "STATUS", "length": 20, "domain": null }, { "name": "GAZ_AREA", "type": "esriFieldTypeDouble", "alias": "GAZ_AREA", "domain": null }, { "name": "IUCN_CODE", "type": "esriFieldTypeString", "alias": "IUCN_CODE", "length": 14, "domain": null }, { "name": "AUTHORITY", "type": "esriFieldTypeString", "alias": "AUTHORITY", "length": 13, "domain": null }, { "name": "GAZ_DATE", "type": "esriFieldTypeDate", "alias": "GAZ_DATE", "length": 8, "domain": null }, { "name": "LATEST_GAZ", "type": "esriFieldTypeString", "alias": "LATEST_GAZ", "length": 15, "domain": null }, { "name": "ENVIRON", "type": "esriFieldTypeString", "alias": "ENVIRON", "length": 11, "domain": null }, { "name": "SOURCE", "type": "esriFieldTypeString", "alias": "SOURCE", "length": 11, "domain": null }, { "name": "CP_APPROVED", "type": "esriFieldTypeString", "alias": "CP_APPROVED", "length": 50, "domain": null }, { "name": "GIS_AREA", "type": "esriFieldTypeDouble", "alias": "GIS_AREA", "domain": null }, { "name": "IPA_ID_SORT", "type": "esriFieldTypeSmallInteger", "alias": "IPA_ID_SORT", "domain": null }, { "name": "IPA_ID", "type": "esriFieldTypeString", "alias": "IPA_ID", "length": 5, "domain": null }, { "name": "X", "type": "esriFieldTypeString", "alias": "X", "length": 255, "domain": null }, { "name": "Y", "type": "esriFieldTypeString", "alias": "Y", "length": 255, "domain": null }, { "name": "SHAPE", "type": "esriFieldTypeGeometry", "alias": "SHAPE", "domain": null } ], "geometryField": { "name": "SHAPE", "type": "esriFieldTypeGeometry", "alias": "SHAPE" }, "indexes": [ { "name": "FDO_OBJECTID", "fields": "OBJECTID", "isAscending": true, "isUnique": true, "description": "" }, { "name": "FDO_SHAPE", "fields": "SHAPE", "isAscending": true, "isUnique": false, "description": "" } ], "subtypes": [], "relationships": [], "canModifyLayer": true, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query,Data", "maxRecordCount": 10000, "supportsStatistics": true, "supportsExceedsLimitStatistics": true, "supportsAdvancedQueries": true, "supportedQueryFormats": "JSON, geoJSON, PBF", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "supportedSpatialRelationships": [ "esriSpatialRelIntersects", "esriSpatialRelContains", "esriSpatialRelCrosses", "esriSpatialRelEnvelopeIntersects", "esriSpatialRelIndexIntersects", "esriSpatialRelOverlaps", "esriSpatialRelTouches", "esriSpatialRelWithin", "esriSpatialRelRelation" ], "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": true, "supportsPercentileStatistics": true, "supportsHavingClause": true, "supportsOrderBy": true, "supportsDistinct": true, "supportsCountDistinct": true, "supportsPagination": true, "supportsLod": false, "supportsQueryWithLodSR": false, "supportsTrueCurve": true, "supportsQueryWithDatumTransformation": true, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": true, "supportsTimeRelation": true, "supportsSqlFormat": false, "supportsQueryAnalytic": false }, "supportsDatumTransformation": true, "dateFieldsTimeReference": null, "preferredTimeReference": null, "datesInUnknownTimezone": false, "hasGeometryProperties": true, "geometryProperties": { "shapeAreaFieldName": "SHAPE_Area", "shapeLengthFieldName": "SHAPE_Length", "units": "esriDecimalDegrees" }, "hasMetadata": false, "isDataArchived": false, "archivingInfo": { "supportsQueryWithHistoricMoment": false, "startArchivingMoment": -1 }, "supportsCoordinatesQuantization": true, "supportsDynamicLegends": true }, { "currentVersion": 10.91, "cimVersion": "2.9.0", "id": 1, "name": "Marine Indigenous Protected Areas", "type": "Feature Layer", "description": "The Collaborative Australian Protected Areas Database (CAPAD) 2014 provides both spatial and text information about government, Indigenous and privately protected areas for continental Australia. State and Territory conservation agencies supplied data current to 30 June 2014. The terrestrial component of the database has been previously released in 1997, 2000, 2002, 2004, 2006, 2008 2010 and 2012.\n\nThis version, provides both spatial and text information about off-shore protected areas in both state and Commonwealth waters. State and Territory conservation agencies supplied data current for 30 June 2014. This is the seventh version of the CAPAD- Marine database, with previous versions published in 1997, 2002, 2004, 2008 2010 and 2012. \n\nCAPAD provides a snapshot of protected areas that meet the IUCN definition of a protected area:\n\n\"A protected area is an area of land and/or sea especially dedicated to the protection and maintenance of biological diversity, and of natural and associated cultural resources, and managed through legal or other effective means\" (IUCN 1994).\n\nThe Australian Government Department of the Environment (DOE) publishes a summary of the CAPAD data biennially on its website at http://www.environment.gov.au/capad\n\n This version of CAPAD 2014-Marine is a public / downloadable dataset available for use through the CC-BY licencing model. \n\nCommercial users: Commercial users should note the availability of a more descriptive dataset for Commonwealth Marine Reserves. It is recommended for use in commercial applications as it includes additional information about management arrangements for Commonwealth Marine Reserves. This dataset is available under Creative Commons Attribution Non-Commercial license from:\nhttp://www.environment.gov.au/fed/catalog/search/resource/details.page?uuid=%7B2E8DD19C-1B93-4D90-BD1C-128DDC4A2998%7D\n\n ------------------------------------------------------------------------------------------------------\nIMPORTANT INFORMATION FOR MARINE USERS \u2013 TRANSITIONAL ARRANGEMENTS\nThe process for developing management plans has been completed for the five Commonwealth marine reserve networks declared around Australia and the Coral Sea Commonwealth Marine Reserve. Until the new management plans come into effect transitional management arrangements are in place. Under these transitional arrangements, there are no changes \"on the water\" for users in the new areas added to the Commonwealth marine reserve estate. If people hold an existing approval to undertake activities within Commonwealth marine reserves or the now-revoked Coral Sea Conservation Zone, they are able to continue to operate under the terms of the existing approval. No additional administrative requirements apply.\n\nThe management plan for the South-east Network came into effect on 1 July 2013 with the management plans for the South-west, North-west, North and Temperate East Networks and the Coral Sea Commonwealth Marine Reserve are under review. More information is available at http://www.environment.gov.au/topics/marine/marine-reserves\n ------------------------------------------------------------------------------------------------------\n\nMain attributes in the database include:\n\nNAME: the name of the protected area. \n\nTYPE: the type of protected area according to the protected area establishment mechanism. \n\nTYPE_ABBR: the abbreviation of the TYPE.\n\nTYPE abbreviations include:\n\n AQR = Aquatic Reserve\n CA = Conservation Area \n CMR = Commonwealth Marine Reserve\n DPAA = Dugong Protection Area (A)\n DPAB = Dugong Protection Area (B)\n DS = Dolphin Sanctuary\n FHAA = Fish Habitat Area (A)\n FHAB = Fish Habitat Area (B)\n FHPA = Fish Habitat Protection Area\n IPA = Indigenous Protected Area\n LS = Rock Lobster Sanctuary\n MAR = Marine Reserve\n MCA = Marine Conservation Area\n MMA = Marine Management Area\n MNNR = Marine National Nature Reserve\n MNP = Marine National Park\n MNR = Marine Nature Reserve\n MP = Marine Park\n MR = Marine Reserve\n MS = Marine Sanctuary\n NP = National Park\n NR = Nature Reserve\n SH = Shipwreck Reserve\n\n\nIUCN: the IUCN protected area management category ascribed by the Managing authority, as outlined in the publication: CNPPA/WCMC \"Guidelines for Protected Area management categories\". Gland: IUCN, 1994. (ISBN: 2-8317-0201-1).\n\n Definitions include:\n IA Strict Nature Reserve: managed mainly for science;\n IB Wilderness Area: managed mainly for wilderness protection;\n II National Park: managed mainly for ecosystem protection;\n III Natural Monument: managed mainly for conservation of specific natural features;\n IV Habitat / Species Management Area: managed mainly for conservation through management intervention;\n V Protected Landscape / Seascape: managed mainly for landscape/seascape conservation and recreation;\n VI Managed Resource Protected Area: managed mainly for the sustainable use of natural ecosystems.\n\nGAZ_AREA: area in hectares as described in the nomination document (e.g. parliamentary gazettal), to the nearest hectare. Some protected areas do not have a specific area in the designation.\n\nGIS_AREA: area in hectares based on current spatial data and an Albers equal area projection for Australia. \n\nGAZ_DATE: the first gazettal or proclamation date that established any protected area at this site. \n\nLATEST_GAZ: the date of the most recent gazettal or proclamation to add land to the protected area. It can be the same date as the GAZ_DATE.\n\nNRS_PA: This attribute indicates the status of the protected area as part of the National Reserve System (NRS). \"Y\" = a protected area located within the Commonwealth, State and Territory jurisdiction. \"N\" = a protected area that does not meet the NRS criteria. \"ND\" = a protected area that does not meet NRS criteria, but compliments the NRS with sympathetic management.\n\n\nSTATE: The state is the state that the protected area is located in. COM = protected areas located in Commonwealth Waters.\n\nAUTHORITY: The Authority responsible for the management of the protected area mechanism.\n\nAUTHORITY abbreviations include:\n \nDOE = Australian Government, Department of the Environment\nGBRMPA = Great Barrier Reef Marine Park Authority\nIMG = Indigenous Management Group\nNSW_DPI = NSW Department of Primary Industries\nNT_PWCNT= Parks and Wildlife Commission of the NT\nPIRSA = Primary Industries and Resources SA\nQLD_DEEDI = QLD Department of Employment, Economic Development and Innovation\nQLD_DPIF = QLD Department of Agriculture, Fisheries and Forestry\nQLD_NPRSR = Queensland Department of National Parks, Recreation, Sport and Racing\nSA_DEWNR = South Australian Department of Environment, Water and Natural Resources \nTAS_DPIPWE = Tasmanian Department of Primary Industries, Parks, Water and Environment\nVIC_DEPI = Victorian Department of Environment and Primary Industries\nWA_DOF = Western Australian Department of Fisheries\nWA_DPAW = Western Australian Department of Parks and Wildlife\n\n\nDATASOURCE: Describes the source of the data for the protected area, values are:\n\nDATA SOURCE abbreviations include:\n \n\nDOE = Australian Government, Department of the Environment\nGBRMPA = Great Barrier Reef Marine Park Authority\nNSW_DPI = NSW Department of Primary Industries\nNT_PWCNT= Parks and Wildlife Commission of the NT\nPIRSA = Primary Industries and Resources SA\nQLD_DEEDI = QLD Department of Employment, Economic Development and Innovation\nQLD_DPIF = QLD Department of Agriculture, Fisheries and Forestry\nQLD_NPRSR = Queensland Department of National Parks, Recreation, Sport and Racing\nSA_DEWNR = South Australian Department of Environment, Water and Natural Resources \nTAS_DPIPWE = Tasmanian Department of Primary Industries, Parks, Water and Environment\nVIC_DEPI = Victorian Department of Environment and Primary Industries\nWA_DOF = Western Australian Department of Fisheries\nWA_DPAW = Western Australian Department of Parks and Wildlife\n\n\nGOVERNANCE: Records the type of governance that has management and decision making responsibility. G = Government, J = Joint.\n\nENVIRON: Protected areas in the Marine CAPAD dataset are classified as 'M'. Marine components of terrestrial parks are included in CAPAD (terrestrial) as Environ= 'B' (Both).\n\nX_COORD: is the longitude in decimal degrees east within the object closest to the centre of the object using the Geodetic Datum of Australia 1994.\n\nY_COORD: is the latitude in decimal degrees south within the object closest to the centre of the object using the Geodetic Datum of Australia 1994.\n\nOBJECTID *, Shape *, SHAPE.AREA and SHAPE.LEN are automatically generated ESRI attributes", "geometryType": "esriGeometryPolygon", "sourceSpatialReference": { "wkid": 4283, "latestWkid": 4283, "xyTolerance": 8.98315284119521E-9, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -400, "falseY": -400, "xyUnits": 9.999999999999999E8, "falseZ": 0, "zUnits": 1, "falseM": 0, "mUnits": 1 }, "copyrightText": "The data is supplied to the Commonwealth for compilation by States and Territories of Australia and custodianship rests with the source agencies listed below:, DOE = Australian Government, Department of the Environment, GBRMPA = Great Barrier Reef Marine Park Authority, IMG = Indigenous Management Group, NSW_DPI = NSW Department of Primary Industries, NSW_MPA = NSW Marine Park Authority, PWCNT= Parks and Wildlife Commission of the NT, PIRSA = Primary Industries and Resources SA, QLD_DEEDI = QLD Department of Employment, Economic Development and Innovation, QLD_NPRSR = Queensland Department of National Parks, Recreation, Sport and Racing, QLD_DPIF = QLD Department of Agriculture, Fisheries and Forestry, SA_DEWNR = South Australian Department of Environment, Water and Natural Resources, TAS_DPIPWE = Tasmanian Department of Primary Industries, Parks, Water and Environment, VIC_DEPI = Victorian Department of Environment and Primary Industries, WA_DPAW = Western Australian Department of Parks and Wildlife, WA_DOF = WA Department of Fisheries", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "referenceScale": 0.0, "drawingInfo": { "renderer": { "type": "simple", "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 230, 152, 0, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSNull", "color": [ 110, 110, 110, 255 ], "width": 0 } } }, "scaleSymbols": true, "transparency": 0, "labelingInfo": null }, "defaultVisibility": true, "extent": { "xmin": 7872182.493289418, "ymin": -8062335.524875559, "xmax": 1.896513059576671E7, "ymax": -992711.3161110345, "spatialReference": { "wkid": 102100, "latestWkid": 3857, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -20037700, "falseY": -30241100, "xyUnits": 1.4892314192838538E8, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeAsHTMLText", "displayField": "NAME", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": [ { "name": "SHAPE", "type": "esriFieldTypeGeometry", "alias": "Shape", "domain": null }, { "name": "SHAPE_Length", "type": "esriFieldTypeDouble", "alias": "SHAPE_Length", "domain": null }, { "name": "SHAPE_Area", "type": "esriFieldTypeDouble", "alias": "SHAPE_Area", "domain": null }, { "name": "OBJECTID", "type": "esriFieldTypeOID", "alias": "OBJECTID", "domain": null }, { "name": "PA_ID", "type": "esriFieldTypeString", "alias": "PA_ID", "length": 10, "domain": null }, { "name": "NAME", "type": "esriFieldTypeString", "alias": "NAME", "length": 255, "domain": null }, { "name": "TYPE", "type": "esriFieldTypeString", "alias": "TYPE", "length": 60, "domain": null }, { "name": "TYPE_ABBR", "type": "esriFieldTypeString", "alias": "TYPE_ABBR", "length": 10, "domain": null }, { "name": "IUCN", "type": "esriFieldTypeString", "alias": "IUCN", "length": 5, "domain": null }, { "name": "NRS_PA", "type": "esriFieldTypeString", "alias": "NRS_PA", "length": 5, "domain": null }, { "name": "GAZ_AREA", "type": "esriFieldTypeDouble", "alias": "GAZ_AREA", "domain": null }, { "name": "GIS_AREA", "type": "esriFieldTypeDouble", "alias": "GIS_AREA", "domain": null }, { "name": "REPT_AREA", "type": "esriFieldTypeDouble", "alias": "REPT_AREA", "domain": null }, { "name": "GAZ_DATE", "type": "esriFieldTypeDate", "alias": "GAZ_DATE", "length": 8, "domain": null }, { "name": "LATEST_GAZ", "type": "esriFieldTypeDate", "alias": "LATEST_GAZ", "length": 8, "domain": null }, { "name": "STATE", "type": "esriFieldTypeString", "alias": "STATE", "length": 4, "domain": null }, { "name": "AUTHORITY", "type": "esriFieldTypeString", "alias": "AUTHORITY", "length": 15, "domain": null }, { "name": "DATASOURCE", "type": "esriFieldTypeString", "alias": "DATASOURCE", "length": 20, "domain": null }, { "name": "GOVERNANCE", "type": "esriFieldTypeString", "alias": "GOVERNANCE", "length": 15, "domain": null }, { "name": "COMMENTS", "type": "esriFieldTypeString", "alias": "COMMENTS", "length": 120, "domain": null }, { "name": "ENVIRON", "type": "esriFieldTypeString", "alias": "ENVIRON", "length": 3, "domain": null }, { "name": "X_COORD", "type": "esriFieldTypeDouble", "alias": "X_COORD", "domain": null }, { "name": "Y_COORD", "type": "esriFieldTypeDouble", "alias": "Y_COORD", "domain": null }, { "name": "MGT_PLAN", "type": "esriFieldTypeString", "alias": "MGT_PLAN", "length": 3, "domain": null }, { "name": "RES_NUMBER", "type": "esriFieldTypeString", "alias": "RES_NUMBER", "length": 15, "domain": null } ], "geometryField": { "name": "SHAPE", "type": "esriFieldTypeGeometry", "alias": "Shape" }, "indexes": [ { "name": "FDO_OBJECTID", "fields": "OBJECTID", "isAscending": true, "isUnique": true, "description": "" }, { "name": "FDO_SHAPE", "fields": "SHAPE", "isAscending": true, "isUnique": false, "description": "" } ], "subtypes": [], "relationships": [], "canModifyLayer": true, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query,Data", "maxRecordCount": 10000, "supportsStatistics": true, "supportsExceedsLimitStatistics": true, "supportsAdvancedQueries": true, "supportedQueryFormats": "JSON, geoJSON, PBF", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "supportedSpatialRelationships": [ "esriSpatialRelIntersects", "esriSpatialRelContains", "esriSpatialRelCrosses", "esriSpatialRelEnvelopeIntersects", "esriSpatialRelIndexIntersects", "esriSpatialRelOverlaps", "esriSpatialRelTouches", "esriSpatialRelWithin", "esriSpatialRelRelation" ], "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": true, "supportsPercentileStatistics": true, "supportsHavingClause": true, "supportsOrderBy": true, "supportsDistinct": true, "supportsCountDistinct": true, "supportsPagination": true, "supportsLod": false, "supportsQueryWithLodSR": false, "supportsTrueCurve": true, "supportsQueryWithDatumTransformation": true, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": true, "supportsTimeRelation": true, "supportsSqlFormat": false, "supportsQueryAnalytic": false }, "supportsDatumTransformation": true, "dateFieldsTimeReference": null, "preferredTimeReference": null, "datesInUnknownTimezone": false, "hasGeometryProperties": true, "geometryProperties": { "shapeAreaFieldName": "SHAPE_Area", "shapeLengthFieldName": "SHAPE_Length", "units": "esriDecimalDegrees" }, "hasMetadata": false, "isDataArchived": false, "archivingInfo": { "supportsQueryWithHistoricMoment": false, "startArchivingMoment": -1 }, "supportsCoordinatesQuantization": true, "supportsDynamicLegends": true }, { "currentVersion": 10.91, "cimVersion": "2.9.0", "id": 2, "name": "Terrestrial Indigenous Protected Areas", "type": "Feature Layer", "description": "This dataset details the Declared Indigenous Protected Areas (IPA) across Australia through the implementation of the Indigenous Protected Areas Programme. These boundaries are not legally binding.\n \nAn Indigenous Protected Area (IPA) is an area of Indigenous-owned land or sea where traditional Indigenous owners have entered into an agreement with the Australian Government to promote biodiversity and cultural resource conservation- making up over a third of Australia's National Reserve System.\n\nFurther information can be found at the website below.\n\nhttp://www.environment.gov.au/indigenous/ipa/index.html \n\nDeclared IPAs in order of gazettal date:\n\nNantawarrina\nPreminghana\nRisdon Cove\nputalina\nDeen Maar\nYalata\nWarul Kawa\nWatarru\nWalalkara\nMount Chappell Island\nBadger Island\nDhimurru\nGuanaba\nWattleridge\nMount Willoughby\nParuku\nNgaanyatjarra\nTyrendarra\nToogimbie\nAnindilyakwa\nLaynhapuy - Stage 1\nNinghan\nNorth Tanami\nWarlu Jilajaa Jumu\nKaanju Ngaachi\nGreat Dog Island\nBabel Island\nlungatalanana\nAngas Downs\nPulu Islet\nTarriwa Kurrukun\nWarddeken\nDjelk\nJamba Dhandan Duringala\nKurtonitj\nFramlingham Forest\nKalka - Pipalyatjara\nBoorabee and The Willows\nLake Condah\nMarri-Jabin (Thamurrurr - Stage 1)\nBrewarrina Ngemba Billabong\nUunguu - Stage 1\nApara - Makiri - Punti\nAntara - Sandy Bore\nDorodong\nWeilmoringle\nYanyuwa (Barni - Wardimantha Awara)\nMinyumai\nGumma\nMandingalbay Yidinji\nSouthern Tanami\nAngkum - Stage 1\nNgunya Jargoon\nBirriliburu\nEastern Kuku Yalanji\nBardi Jawi\nGirringun\nWilinggin\nDambimangari\nBalanggarra\nThuwathu/Bujimulla\nYappala\nWardaman - Stage 1\nKarajarri - Stage 1\nNijinda Durlga - Stage 1\nWarraberalgahl and Porumalgal\nKiwirrkurra\nNyangumarta Warrarn\nMatuwa Kurrara-Kurrara\nKatiti Petermann\nGanalanga-Mindibirrina\nWardang Island", "geometryType": "esriGeometryPolygon", "sourceSpatialReference": { "wkid": 4283, "latestWkid": 4283, "xyTolerance": 8.98315284119521E-9, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -400, "falseY": -400, "xyUnits": 9.999999999999999E8, "falseZ": 0, "zUnits": 1, "falseM": 0, "mUnits": 1 }, "copyrightText": "When using this dataset for analysis or mapping you must always acknowledge the Environment Branch, Indigenous Employment and Recognition Division, Department of the Prime Minister and Cabinet and the Environmental Resources Information Network (ERIN), Department of the Environment (c) Department of the Environment and Department of the Prime Minister and Cabinet, 2016.", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "referenceScale": 0.0, "drawingInfo": { "renderer": { "type": "simple", "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 230, 0, 0, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSNull", "color": [ 230, 0, 0, 255 ], "width": 0 } }, "label": "Terrestrial Indigenous Protected Areas" }, "scaleSymbols": true, "transparency": 0, "labelingInfo": null }, "defaultVisibility": true, "extent": { "xmin": 1.3042559059076574E7, "ymin": -5329211.659337904, "xmax": 1.708395124763135E7, "ymax": -1063770.6728885395, "spatialReference": { "wkid": 102100, "latestWkid": 3857, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -20037700, "falseY": -30241100, "xyUnits": 1.4892314192838538E8, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeAsHTMLText", "displayField": "NAME", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": [ { "name": "COMMENTS", "type": "esriFieldTypeString", "alias": "Comments", "length": 200, "domain": null }, { "name": "LONGITUDE", "type": "esriFieldTypeDouble", "alias": "Longitude", "domain": null }, { "name": "LATITUDE", "type": "esriFieldTypeDouble", "alias": "Latitude", "domain": null }, { "name": "SHAPE_Length", "type": "esriFieldTypeDouble", "alias": "SHAPE_Length", "domain": null }, { "name": "SHAPE_Area", "type": "esriFieldTypeDouble", "alias": "SHAPE_Area", "domain": null }, { "name": "OBJECTID", "type": "esriFieldTypeOID", "alias": "OBJECTID", "domain": null }, { "name": "NAME", "type": "esriFieldTypeString", "alias": "NAME", "length": 60, "domain": null }, { "name": "TYPE", "type": "esriFieldTypeString", "alias": "TYPE", "length": 60, "domain": null }, { "name": "STATE", "type": "esriFieldTypeString", "alias": "STATE", "length": 4, "domain": null }, { "name": "STATUS", "type": "esriFieldTypeString", "alias": "STATUS", "length": 20, "domain": null }, { "name": "GAZ_AREA", "type": "esriFieldTypeDouble", "alias": "GAZ_AREA", "domain": null }, { "name": "IUCN_CODE", "type": "esriFieldTypeString", "alias": "IUCN_CODE", "length": 14, "domain": null }, { "name": "AUTHORITY", "type": "esriFieldTypeString", "alias": "AUTHORITY", "length": 13, "domain": null }, { "name": "GAZ_DATE", "type": "esriFieldTypeDate", "alias": "GAZ_DATE", "length": 8, "domain": null }, { "name": "LATEST_GAZ", "type": "esriFieldTypeString", "alias": "LATEST_GAZ", "length": 15, "domain": null }, { "name": "ENVIRON", "type": "esriFieldTypeString", "alias": "ENVIRON", "length": 11, "domain": null }, { "name": "SOURCE", "type": "esriFieldTypeString", "alias": "SOURCE", "length": 11, "domain": null }, { "name": "CP_APPROVED", "type": "esriFieldTypeString", "alias": "CP_APPROVED", "length": 50, "domain": null }, { "name": "GIS_AREA", "type": "esriFieldTypeDouble", "alias": "GIS_AREA", "domain": null }, { "name": "IPA_ID_SORT", "type": "esriFieldTypeSmallInteger", "alias": "IPA_ID_SORT", "domain": null }, { "name": "IPA_ID", "type": "esriFieldTypeString", "alias": "IPA_ID", "length": 5, "domain": null }, { "name": "X", "type": "esriFieldTypeString", "alias": "X", "length": 255, "domain": null }, { "name": "Y", "type": "esriFieldTypeString", "alias": "Y", "length": 255, "domain": null }, { "name": "SHAPE", "type": "esriFieldTypeGeometry", "alias": "SHAPE", "domain": null } ], "geometryField": { "name": "SHAPE", "type": "esriFieldTypeGeometry", "alias": "SHAPE" }, "indexes": [ { "name": "FDO_OBJECTID", "fields": "OBJECTID", "isAscending": true, "isUnique": true, "description": "" }, { "name": "FDO_SHAPE", "fields": "SHAPE", "isAscending": true, "isUnique": false, "description": "" } ], "subtypes": [], "relationships": [], "canModifyLayer": true, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query,Data", "maxRecordCount": 10000, "supportsStatistics": true, "supportsExceedsLimitStatistics": true, "supportsAdvancedQueries": true, "supportedQueryFormats": "JSON, geoJSON, PBF", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "supportedSpatialRelationships": [ "esriSpatialRelIntersects", "esriSpatialRelContains", "esriSpatialRelCrosses", "esriSpatialRelEnvelopeIntersects", "esriSpatialRelIndexIntersects", "esriSpatialRelOverlaps", "esriSpatialRelTouches", "esriSpatialRelWithin", "esriSpatialRelRelation" ], "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": true, "supportsPercentileStatistics": true, "supportsHavingClause": true, "supportsOrderBy": true, "supportsDistinct": true, "supportsCountDistinct": true, "supportsPagination": true, "supportsLod": false, "supportsQueryWithLodSR": false, "supportsTrueCurve": true, "supportsQueryWithDatumTransformation": true, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": true, "supportsTimeRelation": true, "supportsSqlFormat": false, "supportsQueryAnalytic": false }, "supportsDatumTransformation": true, "dateFieldsTimeReference": null, "preferredTimeReference": null, "datesInUnknownTimezone": false, "hasGeometryProperties": true, "geometryProperties": { "shapeAreaFieldName": "SHAPE_Area", "shapeLengthFieldName": "SHAPE_Length", "units": "esriDecimalDegrees" }, "hasMetadata": false, "isDataArchived": false, "archivingInfo": { "supportsQueryWithHistoricMoment": false, "startArchivingMoment": -1 }, "supportsCoordinatesQuantization": true, "supportsDynamicLegends": true }, { "currentVersion": 10.91, "cimVersion": "2.9.0", "id": 3, "name": "Australia Protected Areas (CAPAD) 2014", "type": "Feature Layer", "description": "The Collaborative Australian Protected Areas Database (CAPAD) 2014 provides both spatial and text information about government, indigenous and privately protected areas for continental Australia. State and Territory conservation agencies supplied data current to 30 June 2014. This is the ninth version of the database, with previous versions released in 1997, 2000, 2002, 2004, 2006, 2008, 2010 and 2012. \n\nThe Department also publishes protected areas data for the marine environment. \"CAPAD 2014-marine\" contains spatial and text information about offshore protected areas, for both State and Commonwealth waters. Previous versions of CAPAD marine information have been published in 1997, 2002, 2004, 2008, 2010 and 2012. \n\nCAPAD provides a snapshot of protected areas that meet the IUCN definition of a protected area:\"A protected area is an area of land and/or sea especially dedicated to the protection and maintenance of biological diversity, and of natural and associated cultural resources, and managed through legal or other effective means\" (IUCN 1994).\n\nThe department publishes a summary of the CAPAD data biennially on its website at http://www.environment.gov.au/capad/ This version of CAPAD 2014 is a public and downloadable version of CAPAD 2014 data, available for use through the CC-BY licencing model. \n\nMain attributes in the full version of CAPAD 2014 include:\n\nPA_ID: The protected area ID code. Created from RES_NUMBER if unique, otherwise it is a DoE generated number.\n\nNAME: the name of the protected area. Gazetted PAs with no name are flagged as \"Unnamed\" with a reserve number. \n\nTYPE: the type of protected area according to the protected area establishment mechanism. \n\nTYPE_ABBR: the abbreviation of the TYPE.\nACCP\tConservation Covenant\nASMA\tAntarctic Specially Managed Area\nASPA\tAntarctic Specially Protected Area\nBG\tBotanic Gardens\nCA\tConservation Area\nCCA\tCoordinated Conservation Area\nCCAZ1\tCCA Zone 1 National Park\nCCAZ3\tCCA Zone 3 State Conservation Area\nCOR\tCoastal Reserve\nCP\tConservation Park\nCR\tCoastal Reserve\nFLR\tFlora Reserve\nFR\tForest Reserve\nGR\tGame Reserve\nHA\tHeritage Agreement\nHIR\tHistorical Reserve\nHPOT\tBiodiversity Hotspot\nHR\tHeritage River\nHS\tHistoric Site\nHTR\tHunting Reserve\nIPA\tIndigenous Protected Area\nKCR\tKarst Conservation Reserve\nMA\tManagement Agreement\nMAA\tManagement Agreement Area\nMCP\tNational Parks Act Schedule 4 park or reserve\nMNP\tMarine National Park\nMR\tMiscellaneous Reserve\nMS\tMarine Sanctuary\nNAP\tNature Park\nNCA\tNatural Catchment Area\nNCR\tNature Conservation Reserve\nNFR\tNatural Features Reserve\nNP\tNational Park\nNPA\tNational Park Aboriginal\nNPC\tNational Park (Commonwealth)\nNR\tNature Reserve\nNRA\tNature Recreation Area\nNREF\tNature Refuge\nNRS\tNRS Addition - Gazettal in Progress\nOCA\tOther Conservation Area\nOCA/NAP\tOther Conservation Area / Nature Park\nOP\tOther\nPA\tProtected Area\nPNPA\tProposed National Parks Act park or park addition\nPNR\tPrivate Nature Reserve\nPPP\tPermanent Park Preserve\nPS\tPrivate Sanctuary\nRA\tReference Area\nREP\tRegional Park\nRNA\tRemote and Natural Area - not scheduled under NPA/Remote and Natural Area - Schedule 6, National Parks Act (Abbreviated as Remote and Natural Area - not scheduled under Nat Parks Act) \nRP\tRecreation Park\nRR Regional Reserve\nS5G 5(1)(g)\tReserve\nS5H 5(1)(h)\tReserve\nSCA\tState Conservation Area\nSP\tState Park\nSR\tState Reserve\nWPA\tWilderness Protection Area\nWP\tWilderness Park\nWZ\tWilderness Zone\n\nIUCN: the IUCN protected area management category ascribed by the Managing authority, as outlined in the publication: CNPPA/WCMC \"Guidelines for Protected Area management categories\". Gland: IUCN, 1994. (ISBN: 2-8317-0201-1).\n\nDefinitions include:\nIA\tStrict Nature Reserve: managed mainly for science;\nIB\tWilderness Area: managed mainly for wilderness protection;\nII\tNational Park: managed mainly for ecosystem protection;\nIII\tNatural Monument: managed mainly for conservation of specific natural features;\nIV\tHabitat / Species Management Area: managed mainly for conservation through management intervention;\nV\tProtected Landscape / Seascape: managed mainly for landscape/seascape conservation and recreation;\nVI\t Managed Resource Protected Area: managed mainly for the sustainable use of natural ecosystems.\n\nGAZ_AREA: area in hectares as described in the nomination document (e.g. parliamentary gazettal), to the nearest hectare. Some protected areas do not have a specific area in the designation.\n\nGIS_AREA: area in hectares based on current spatial data and an Albers equal area projection for Australia. Where protected area consists of multiple polygons (parts) the GIS_AREA is the sum of all the polygons with the same name, type, state and IUCN category. It is this field that is used to calculate the statistics provided in spreadsheets at: www.environment.gov.au/capad/\n\nREPT_AREA is the same with GIS_AREA (previously REPT_AREA is in hectares from the GAZ_AREA attribute and if this is a null value then the GIS_AREA is used. For Protected areas with multiple records, REPT_AREA is a calculated by dividing GAZ_AREA by GIS_AREA of the total then applying this factor to the GIS_AREA of the record). Due to the fact that not all received data have REPT_AREA, it is incomplete and inconsistent if REPT_AREA is used for analysis. \n\nGAZ_DATE: the first gazettal or proclamation date that established any protected area at this site. \n\nLATEST_GAZ: the date of the most recent gazettal or proclamation to add land to the protected area. It can be the same date as the GAZ_AREA.\n\nNRS_PA: This attribute indicates the status of the protected area as part of the National Reserve System (NRS). \"Y\" = Yes. A protected area located within the State and Territory jurisdiction \"I\" = an interim protected area - in the process of being gazetted/established. \"N\" = No. A protected area that does not meet the NRS criteria. \"ND\" = No Data. A protected area that does not meet NRS criteria, but compliments the NRS with sympathetic management.\n\nSTATE: The state is the state that the protected area is located in. EXT= protected areas located in Australian external territories.\n\nAUTHORITY: The Authority responsible for the management of the protected area mechanism. \nAAD\tAustralian Antarctic Division\nAC_SA\tAlexandrina Council\nACT_TAMSD\tACT Territory and Municipal Services Directorate\nAWC\tAustralian Wildlife Conservancy\nAWC & BA\tAustralian Wildlife Conservancy & Birds Australia\nBBT\tBookmark Biosphere Trust\nBHA\tBush Heritage Australia\nCCC_QLD\tCaloundra City Council\nCR PTY LTD\tConservation Reserves PTY LTD\nDOE\tAustralian Government, Department of the Environment\nEAC_QLD\tEwamian Aboriginal Corporation\nEL Inc._NSW\tEnduring Landscapes Inc.\nFC_NSW\tForestry Commission of NSW\nFPR Inc.\tFriends of the Porongurup Range (Inc)\nGCC_NSW\tGosford City Council\nHCR_CMA\tHunter - Central Rivers Catchment Management Authority\nILC_NT\tIndigenous Land Corporation\nIMG\tIndigenous management group\nIMG, LILC\tIndigenous management group and Local Indigenous Land Council\nKRGC_NSW\tKu-ring-gai Council\nLHI_Board\tLord Howe Island Board\nLILC\tLocal Indigenous Land Council\nLVRC_Q_EPA\tLockyer Valley Regional Council and QLD EPA\nMINCA_QLD\tMagnetic Island Nature Care Association\nNF SA Inc.\tNature Foundation SA Inc\nNSC_QLD\tNoosa Shire Council\nNSW_OEH\tNSW Office of Environment and Heritage\nNT_PWCNT\tParks and Wildlife Commission of the NT\nQLD_DERM\tQueensland Department of Environment and Resource Management\nQLD_EHP\tQueensland Department of Environment and Heritage Protection\nQLD_EPA\tQueensland Environment Protection Agency\nQLD_NPRSR\tQueensland Department of National Parks, Recreation, Sport and Racing\nSA_DEH\tSouth Australian Department of Environment and Heritage\nSA_DEWNR\tSouth Australian Department of Environment, Water and Natural Resources\nF_SA\tForestry South Australia\nSCRC_QLD\tSunshine Coast Regional Council\nTAS_DPIPWE\tTasmanian Department of Primary Industries, Parks, Water and Environment\nTAS_WPMT\tWellington Park Management Trust Tasmania\nTFN_VIC\tTrust for Nature (Victoria)\nTLC Inc_TAS\tTasmanian Land Conservancy Inc.\nTSRA\tTorres Strait Regional Authority\nTTTN\tThe Trustee for the Trust for Nature\nU. Ballarat\tUniversity of Ballarat\nVIC_DEPI\tVictorian Department of Environment and Primary Industries\nWA_DPAW\tWestern Australian Department of Parks and Wildlife\nWAC\tWinangakirri Aboriginal Corporation\nWEC\tWorlds End Conservation Pty Ltd\n\nDATASOURCE: Describes the source of the data for the protected area, values are: \nAAD\tAustralian Antarctic Division\nACT_TAMSD\tACT Territory and Municipal Services Directorate\nDOE\tAustralian Government, Department of the Environment\nDOE_NRSP\tAustralian Government, Department of the Environment - National Reserve System Program\nF_SA\tForestry South Australia\nFC_NSW\tForestry Commission of NSW\nLHI_Board\tLord Howe Island Board\nNSW_OEH\tNSW Office of Environment and Heritage\nNT_PWCNT\tParks and Wildlife Commission of the NT\nQLD_EHP\tQueensland Department of Environment and Heritage Protection\nQLD_NPRSR\tQueensland Department of National Parks, Recreation, Sport and Racing\nSA_DEWNR\tSouth Australian Department of Environment, Water and Natural Resources\nTAS_DPIPWE\tTasmanian Department of Primary Industries, Parks, Water and Environment\nVIC_DEPI\tVictorian Department of Environment and Primary Industries\nWA_DPAW\tWestern Australian Department of Parks and Wildlife\n\nGOVERNANCE: Records the type of governance that has management and decision making responsibility. G = Government, C = Community (conserved areas including indigenous peoples or local communities), J = Joint or P = Privately managed.\n\nENVIRON: A protected area gazetted as terrestrial may have a marine component and vice versa. A protected area can be 'T' terrestrial, marine 'M' and both 'B'. Terrestrial CAPAD 2014 contains 'T' and 'B'. Marine CAPAD 2014 contains 'M'.\n\nOVERLAP: Shows whether or not the protected area is overlapped by another. Protected areas with a value of '1' are the primary protected area in that area. A protected area with a value of '2' is completely overlapped by another protected area.\n\nX_COORD: is the longitude in decimal degrees east within the object closest to the centre of the object using the Geocentric Datum of Australia 1994.\n\nY_COORD: is the latitude in decimal degrees south within the object closest to the centre of the object using the Geocentric Datum of Australia 1994.\n\nMGT_PLAN: The code of the status of the management plan for the protected area.\n\nDefinitions Include:\nP - In Preparation - Some form of management document was being prepared.\nD - Draft - A draft management document was released for comment by the public, management board or equivalent.\nS - Statutory - Enabling legislation establishes the management of a protected area and separate management document is not required.\nI - Management Intent - A formal statement of management intent has been prepared that clearly sets out the management objectives for the protected area but includes little else.\nM - Management Plan - A formally adopted management plan that has been through consultation and contains strategies and actions for implementation for this protected area. \nR - Regional Plan - A formally adopted management plan has been through consultation and contains general strategies and actions for implementation over a group of protected areas.\nN - Unknown - No form of management document could be found.\n\nRES_NUMBER: The reserve number (if declared) as used by the controlling authority.\n\nOBJECTID *, Shape *, SHAPE.AREA and SHAPE.LEN are automatically generated ESRI attributes", "geometryType": "esriGeometryPolygon", "sourceSpatialReference": { "wkid": 4283, "latestWkid": 4283, "xyTolerance": 8.98315284119521E-9, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -400, "falseY": -400, "xyUnits": 9.999999999999999E8, "falseZ": 0, "zUnits": 1, "falseM": 0, "mUnits": 1 }, "copyrightText": "The data is supplied to the Commonwealth for compilation by States and Territories of Australia and custodianship rests with the source agencies listed below:, Australian Antarctic Division (DoE); ACT Territory and Municipal Services Directorate; Australian Government Department of the Environment; NSW Lord Howard Island Board; Forestry South Australia; Forestry Commission of NSW; NSW Office of Environment and Heritage; Parks and Wildlife Commission of the NT; Queensland Department of Environment and Heritage Protection; Queensland Department of National Parks, Recreation, Sport and Racing; South Australian Department of Environment, Water and Natural Resources; Tasmanian Department of Primary Industries, Parks, Water and Environment; Victorian Department of Environment and Primary Industries; Western Australian Department of Parks and Wildlife", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "referenceScale": 0.0, "drawingInfo": { "renderer": { "type": "uniqueValue", "field1": "IUCN", "uniqueValueInfos": [ { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 68, 137, 112, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 104, 104, 104, 255 ], "width": 0.2 } }, "value": "IA", "label": "IA - Strict Nature Reserve" }, { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 180, 215, 158, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 110, 110, 110, 255 ], "width": 0.4 } }, "value": "IB", "label": "IB - Wilderness Area" }, { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 123, 188, 99, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 104, 104, 104, 255 ], "width": 0.2 } }, "value": "II", "label": "II - National Park" }, { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 209, 255, 115, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 110, 110, 110, 255 ], "width": 0.4 } }, "value": "III", "label": "III - Natural Monument" }, { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 255, 248, 163, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 104, 104, 104, 255 ], "width": 0.2 } }, "value": "IV", "label": "IV - Habitat/Species Management Area" }, { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 158, 187, 215, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 110, 110, 110, 255 ], "width": 0.4 } }, "value": "V", "label": "V - Protected Landscape/Seascape" }, { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 185, 230, 251, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 104, 104, 104, 255 ], "width": 0.2 } }, "value": "VI", "label": "VI - Managed Resource Protected Area" }, { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 204, 204, 204, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 110, 110, 110, 255 ], "width": 0.4 } }, "value": "NA", "label": "Other" } ], "fieldDelimiter": ",", "authoringInfo": { "colorRamp": { "type": "multipart", "colorRamps": [ { "type": "algorithmic", "algorithm": "esriHSVAlgorithm", "fromColor": [ 56, 168, 0, 255 ], "toColor": [ 255, 255, 0, 255 ] }, { "type": "algorithmic", "algorithm": "esriHSVAlgorithm", "fromColor": [ 255, 255, 0, 255 ], "toColor": [ 255, 0, 0, 255 ] } ] } } }, "scaleSymbols": true, "transparency": 0, "labelingInfo": null }, "defaultVisibility": true, "extent": { "xmin": 6777049.397491942, "ymin": -1.0900835743515741E7, "xmax": 1.8697766620282985E7, "ymax": -1063770.6728885395, "spatialReference": { "wkid": 102100, "latestWkid": 3857, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -20037700, "falseY": -30241100, "xyUnits": 1.4892314192838538E8, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeAsHTMLText", "displayField": "NAME", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": [ { "name": "SHAPE", "type": "esriFieldTypeGeometry", "alias": "Shape", "domain": null }, { "name": "SHAPE_Length", "type": "esriFieldTypeDouble", "alias": "SHAPE_Length", "domain": null }, { "name": "SHAPE_Area", "type": "esriFieldTypeDouble", "alias": "SHAPE_Area", "domain": null }, { "name": "OBJECTID", "type": "esriFieldTypeOID", "alias": "OBJECTID", "domain": null }, { "name": "PA_ID", "type": "esriFieldTypeString", "alias": "PA_ID", "length": 20, "domain": null }, { "name": "NAME", "type": "esriFieldTypeString", "alias": "NAME", "length": 255, "domain": null }, { "name": "TYPE", "type": "esriFieldTypeString", "alias": "TYPE", "length": 60, "domain": null }, { "name": "TYPE_ABBR", "type": "esriFieldTypeString", "alias": "TYPE_ABBR", "length": 10, "domain": null }, { "name": "IUCN", "type": "esriFieldTypeString", "alias": "IUCN", "length": 5, "domain": null }, { "name": "NRS_PA", "type": "esriFieldTypeString", "alias": "NRS_PA", "length": 5, "domain": null }, { "name": "GAZ_AREA", "type": "esriFieldTypeDouble", "alias": "GAZ_AREA", "domain": null }, { "name": "GIS_AREA", "type": "esriFieldTypeDouble", "alias": "GIS_AREA", "domain": null }, { "name": "REPT_AREA", "type": "esriFieldTypeDouble", "alias": "REPT_AREA", "domain": null }, { "name": "GAZ_DATE", "type": "esriFieldTypeDate", "alias": "GAZ_DATE", "length": 8, "domain": null }, { "name": "LATEST_GAZ", "type": "esriFieldTypeDate", "alias": "LATEST_GAZ", "length": 8, "domain": null }, { "name": "STATE", "type": "esriFieldTypeString", "alias": "STATE", "length": 4, "domain": null }, { "name": "AUTHORITY", "type": "esriFieldTypeString", "alias": "AUTHORITY", "length": 15, "domain": null }, { "name": "DATASOURCE", "type": "esriFieldTypeString", "alias": "DATASOURCE", "length": 20, "domain": null }, { "name": "GOVERNANCE", "type": "esriFieldTypeString", "alias": "GOVERNANCE", "length": 3, "domain": null }, { "name": "COMMENTS", "type": "esriFieldTypeString", "alias": "COMMENTS", "length": 120, "domain": null }, { "name": "ENVIRON", "type": "esriFieldTypeString", "alias": "ENVIRON", "length": 3, "domain": null }, { "name": "OVERLAP", "type": "esriFieldTypeString", "alias": "OVERLAP", "length": 3, "domain": null }, { "name": "X_COORD", "type": "esriFieldTypeDouble", "alias": "X_COORD", "domain": null }, { "name": "Y_COORD", "type": "esriFieldTypeDouble", "alias": "Y_COORD", "domain": null }, { "name": "MGT_PLAN", "type": "esriFieldTypeString", "alias": "MGT_PLAN", "length": 3, "domain": null }, { "name": "RES_NUMBER", "type": "esriFieldTypeString", "alias": "RES_NUMBER", "length": 15, "domain": null } ], "geometryField": { "name": "SHAPE", "type": "esriFieldTypeGeometry", "alias": "Shape" }, "indexes": [ { "name": "FDO_OBJECTID", "fields": "OBJECTID", "isAscending": true, "isUnique": true, "description": "" }, { "name": "FDO_SHAPE", "fields": "SHAPE", "isAscending": true, "isUnique": false, "description": "" }, { "name": "I19TYPE", "fields": "TYPE", "isAscending": true, "isUnique": false, "description": "" }, { "name": "I19NRS_PA", "fields": "NRS_PA", "isAscending": true, "isUnique": false, "description": "" }, { "name": "I19NAME", "fields": "NAME", "isAscending": true, "isUnique": false, "description": "" }, { "name": "I19IUCN", "fields": "IUCN", "isAscending": true, "isUnique": false, "description": "" } ], "subtypes": [], "relationships": [], "canModifyLayer": true, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query,Data", "maxRecordCount": 10000, "supportsStatistics": true, "supportsExceedsLimitStatistics": true, "supportsAdvancedQueries": true, "supportedQueryFormats": "JSON, geoJSON, PBF", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "supportedSpatialRelationships": [ "esriSpatialRelIntersects", "esriSpatialRelContains", "esriSpatialRelCrosses", "esriSpatialRelEnvelopeIntersects", "esriSpatialRelIndexIntersects", "esriSpatialRelOverlaps", "esriSpatialRelTouches", "esriSpatialRelWithin", "esriSpatialRelRelation" ], "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": true, "supportsPercentileStatistics": true, "supportsHavingClause": true, "supportsOrderBy": true, "supportsDistinct": true, "supportsCountDistinct": true, "supportsPagination": true, "supportsLod": false, "supportsQueryWithLodSR": false, "supportsTrueCurve": true, "supportsQueryWithDatumTransformation": true, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": true, "supportsTimeRelation": true, "supportsSqlFormat": false, "supportsQueryAnalytic": false }, "supportsDatumTransformation": true, "dateFieldsTimeReference": null, "preferredTimeReference": null, "datesInUnknownTimezone": false, "hasGeometryProperties": true, "geometryProperties": { "shapeAreaFieldName": "SHAPE_Area", "shapeLengthFieldName": "SHAPE_Length", "units": "esriDecimalDegrees" }, "hasMetadata": false, "isDataArchived": false, "archivingInfo": { "supportsQueryWithHistoricMoment": false, "startArchivingMoment": -1 }, "supportsCoordinatesQuantization": true, "supportsDynamicLegends": true }, { "currentVersion": 10.91, "cimVersion": "2.9.0", "id": 4, "name": "Australia Protected Areas (CAPAD) 2014", "type": "Feature Layer", "description": "The Collaborative Australian Protected Areas Database (CAPAD) 2014 provides both spatial and text information about government, Indigenous and privately protected areas for continental Australia. State and Territory conservation agencies supplied data current to 30 June 2014. The terrestrial component of the database has been previously released in 1997, 2000, 2002, 2004, 2006, 2008 2010 and 2012.\n\nThis version, provides both spatial and text information about off-shore protected areas in both state and Commonwealth waters. State and Territory conservation agencies supplied data current for 30 June 2014. This is the seventh version of the CAPAD- Marine database, with previous versions published in 1997, 2002, 2004, 2008 2010 and 2012. \n\nCAPAD provides a snapshot of protected areas that meet the IUCN definition of a protected area:\n\n\"A protected area is an area of land and/or sea especially dedicated to the protection and maintenance of biological diversity, and of natural and associated cultural resources, and managed through legal or other effective means\" (IUCN 1994).\n\nThe Australian Government Department of the Environment (DOE) publishes a summary of the CAPAD data biennially on its website at http://www.environment.gov.au/capad\n\n This version of CAPAD 2014-Marine is a public / downloadable dataset available for use through the CC-BY licencing model. \n\nCommercial users: Commercial users should note the availability of a more descriptive dataset for Commonwealth Marine Reserves. It is recommended for use in commercial applications as it includes additional information about management arrangements for Commonwealth Marine Reserves. This dataset is available under Creative Commons Attribution Non-Commercial license from:\nhttp://www.environment.gov.au/fed/catalog/search/resource/details.page?uuid=%7B2E8DD19C-1B93-4D90-BD1C-128DDC4A2998%7D\n\n ------------------------------------------------------------------------------------------------------\nIMPORTANT INFORMATION FOR MARINE USERS \u2013 TRANSITIONAL ARRANGEMENTS\nThe process for developing management plans has been completed for the five Commonwealth marine reserve networks declared around Australia and the Coral Sea Commonwealth Marine Reserve. Until the new management plans come into effect transitional management arrangements are in place. Under these transitional arrangements, there are no changes \"on the water\" for users in the new areas added to the Commonwealth marine reserve estate. If people hold an existing approval to undertake activities within Commonwealth marine reserves or the now-revoked Coral Sea Conservation Zone, they are able to continue to operate under the terms of the existing approval. No additional administrative requirements apply.\n\nThe management plan for the South-east Network came into effect on 1 July 2013 with the management plans for the South-west, North-west, North and Temperate East Networks and the Coral Sea Commonwealth Marine Reserve are under review. More information is available at http://www.environment.gov.au/topics/marine/marine-reserves\n ------------------------------------------------------------------------------------------------------\n\nMain attributes in the database include:\n\nNAME: the name of the protected area. \n\nTYPE: the type of protected area according to the protected area establishment mechanism. \n\nTYPE_ABBR: the abbreviation of the TYPE.\n\nTYPE abbreviations include:\n\n AQR = Aquatic Reserve\n CA = Conservation Area \n CMR = Commonwealth Marine Reserve\n DPAA = Dugong Protection Area (A)\n DPAB = Dugong Protection Area (B)\n DS = Dolphin Sanctuary\n FHAA = Fish Habitat Area (A)\n FHAB = Fish Habitat Area (B)\n FHPA = Fish Habitat Protection Area\n IPA = Indigenous Protected Area\n LS = Rock Lobster Sanctuary\n MAR = Marine Reserve\n MCA = Marine Conservation Area\n MMA = Marine Management Area\n MNNR = Marine National Nature Reserve\n MNP = Marine National Park\n MNR = Marine Nature Reserve\n MP = Marine Park\n MR = Marine Reserve\n MS = Marine Sanctuary\n NP = National Park\n NR = Nature Reserve\n SH = Shipwreck Reserve\n\n\nIUCN: the IUCN protected area management category ascribed by the Managing authority, as outlined in the publication: CNPPA/WCMC \"Guidelines for Protected Area management categories\". Gland: IUCN, 1994. (ISBN: 2-8317-0201-1).\n\n Definitions include:\n IA Strict Nature Reserve: managed mainly for science;\n IB Wilderness Area: managed mainly for wilderness protection;\n II National Park: managed mainly for ecosystem protection;\n III Natural Monument: managed mainly for conservation of specific natural features;\n IV Habitat / Species Management Area: managed mainly for conservation through management intervention;\n V Protected Landscape / Seascape: managed mainly for landscape/seascape conservation and recreation;\n VI Managed Resource Protected Area: managed mainly for the sustainable use of natural ecosystems.\n\nGAZ_AREA: area in hectares as described in the nomination document (e.g. parliamentary gazettal), to the nearest hectare. Some protected areas do not have a specific area in the designation.\n\nGIS_AREA: area in hectares based on current spatial data and an Albers equal area projection for Australia. \n\nGAZ_DATE: the first gazettal or proclamation date that established any protected area at this site. \n\nLATEST_GAZ: the date of the most recent gazettal or proclamation to add land to the protected area. It can be the same date as the GAZ_DATE.\n\nNRS_PA: This attribute indicates the status of the protected area as part of the National Reserve System (NRS). \"Y\" = a protected area located within the Commonwealth, State and Territory jurisdiction. \"N\" = a protected area that does not meet the NRS criteria. \"ND\" = a protected area that does not meet NRS criteria, but compliments the NRS with sympathetic management.\n\n\nSTATE: The state is the state that the protected area is located in. COM = protected areas located in Commonwealth Waters.\n\nAUTHORITY: The Authority responsible for the management of the protected area mechanism.\n\nAUTHORITY abbreviations include:\n \nDOE = Australian Government, Department of the Environment\nGBRMPA = Great Barrier Reef Marine Park Authority\nIMG = Indigenous Management Group\nNSW_DPI = NSW Department of Primary Industries\nNT_PWCNT= Parks and Wildlife Commission of the NT\nPIRSA = Primary Industries and Resources SA\nQLD_DEEDI = QLD Department of Employment, Economic Development and Innovation\nQLD_DPIF = QLD Department of Agriculture, Fisheries and Forestry\nQLD_NPRSR = Queensland Department of National Parks, Recreation, Sport and Racing\nSA_DEWNR = South Australian Department of Environment, Water and Natural Resources \nTAS_DPIPWE = Tasmanian Department of Primary Industries, Parks, Water and Environment\nVIC_DEPI = Victorian Department of Environment and Primary Industries\nWA_DOF = Western Australian Department of Fisheries\nWA_DPAW = Western Australian Department of Parks and Wildlife\n\n\nDATASOURCE: Describes the source of the data for the protected area, values are:\n\nDATA SOURCE abbreviations include:\n \n\nDOE = Australian Government, Department of the Environment\nGBRMPA = Great Barrier Reef Marine Park Authority\nNSW_DPI = NSW Department of Primary Industries\nNT_PWCNT= Parks and Wildlife Commission of the NT\nPIRSA = Primary Industries and Resources SA\nQLD_DEEDI = QLD Department of Employment, Economic Development and Innovation\nQLD_DPIF = QLD Department of Agriculture, Fisheries and Forestry\nQLD_NPRSR = Queensland Department of National Parks, Recreation, Sport and Racing\nSA_DEWNR = South Australian Department of Environment, Water and Natural Resources \nTAS_DPIPWE = Tasmanian Department of Primary Industries, Parks, Water and Environment\nVIC_DEPI = Victorian Department of Environment and Primary Industries\nWA_DOF = Western Australian Department of Fisheries\nWA_DPAW = Western Australian Department of Parks and Wildlife\n\n\nGOVERNANCE: Records the type of governance that has management and decision making responsibility. G = Government, J = Joint.\n\nENVIRON: Protected areas in the Marine CAPAD dataset are classified as 'M'. Marine components of terrestrial parks are included in CAPAD (terrestrial) as Environ= 'B' (Both).\n\nX_COORD: is the longitude in decimal degrees east within the object closest to the centre of the object using the Geodetic Datum of Australia 1994.\n\nY_COORD: is the latitude in decimal degrees south within the object closest to the centre of the object using the Geodetic Datum of Australia 1994.\n\nOBJECTID *, Shape *, SHAPE.AREA and SHAPE.LEN are automatically generated ESRI attributes", "geometryType": "esriGeometryPolygon", "sourceSpatialReference": { "wkid": 4283, "latestWkid": 4283, "xyTolerance": 8.98315284119521E-9, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -400, "falseY": -400, "xyUnits": 9.999999999999999E8, "falseZ": 0, "zUnits": 1, "falseM": 0, "mUnits": 1 }, "copyrightText": "The data is supplied to the Commonwealth for compilation by States and Territories of Australia and custodianship rests with the source agencies listed below:, DOE = Australian Government, Department of the Environment, GBRMPA = Great Barrier Reef Marine Park Authority, IMG = Indigenous Management Group, NSW_DPI = NSW Department of Primary Industries, NSW_MPA = NSW Marine Park Authority, PWCNT= Parks and Wildlife Commission of the NT, PIRSA = Primary Industries and Resources SA, QLD_DEEDI = QLD Department of Employment, Economic Development and Innovation, QLD_NPRSR = Queensland Department of National Parks, Recreation, Sport and Racing, QLD_DPIF = QLD Department of Agriculture, Fisheries and Forestry, SA_DEWNR = South Australian Department of Environment, Water and Natural Resources, TAS_DPIPWE = Tasmanian Department of Primary Industries, Parks, Water and Environment, VIC_DEPI = Victorian Department of Environment and Primary Industries, WA_DPAW = Western Australian Department of Parks and Wildlife, WA_DOF = WA Department of Fisheries", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "referenceScale": 0.0, "drawingInfo": { "renderer": { "type": "uniqueValue", "field1": "IUCN", "uniqueValueInfos": [ { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 68, 137, 112, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 110, 110, 110, 255 ], "width": 0.4 } }, "value": "IA", "label": "IA" }, { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 123, 188, 99, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 104, 104, 104, 255 ], "width": 0.2 } }, "value": "II", "label": "II" }, { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 209, 255, 115, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 110, 110, 110, 255 ], "width": 0.4 } }, "value": "III", "label": "III" }, { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 255, 248, 163, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 104, 104, 104, 255 ], "width": 0.2 } }, "value": "IV", "label": "IV" }, { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 158, 187, 215, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 110, 110, 110, 255 ], "width": 0.4 } }, "value": "V", "label": "V" }, { "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 185, 230, 251, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 104, 104, 104, 255 ], "width": 0.2 } }, "value": "VI", "label": "VI" } ], "fieldDelimiter": ",", "authoringInfo": { "colorRamp": { "type": "multipart", "colorRamps": [ { "type": "algorithmic", "algorithm": "esriHSVAlgorithm", "fromColor": [ 56, 168, 0, 255 ], "toColor": [ 255, 255, 0, 255 ] }, { "type": "algorithmic", "algorithm": "esriHSVAlgorithm", "fromColor": [ 255, 255, 0, 255 ], "toColor": [ 255, 0, 0, 255 ] } ] } } }, "scaleSymbols": true, "transparency": 0, "labelingInfo": null }, "defaultVisibility": true, "extent": { "xmin": 7872182.493289418, "ymin": -8062335.524875559, "xmax": 1.896513059576671E7, "ymax": -992711.3161110345, "spatialReference": { "wkid": 102100, "latestWkid": 3857, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -20037700, "falseY": -30241100, "xyUnits": 1.4892314192838538E8, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeAsHTMLText", "displayField": "NAME", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": [ { "name": "SHAPE", "type": "esriFieldTypeGeometry", "alias": "Shape", "domain": null }, { "name": "SHAPE_Length", "type": "esriFieldTypeDouble", "alias": "SHAPE_Length", "domain": null }, { "name": "SHAPE_Area", "type": "esriFieldTypeDouble", "alias": "SHAPE_Area", "domain": null }, { "name": "OBJECTID", "type": "esriFieldTypeOID", "alias": "OBJECTID", "domain": null }, { "name": "PA_ID", "type": "esriFieldTypeString", "alias": "PA_ID", "length": 10, "domain": null }, { "name": "NAME", "type": "esriFieldTypeString", "alias": "NAME", "length": 255, "domain": null }, { "name": "TYPE", "type": "esriFieldTypeString", "alias": "TYPE", "length": 60, "domain": null }, { "name": "TYPE_ABBR", "type": "esriFieldTypeString", "alias": "TYPE_ABBR", "length": 10, "domain": null }, { "name": "IUCN", "type": "esriFieldTypeString", "alias": "IUCN", "length": 5, "domain": null }, { "name": "NRS_PA", "type": "esriFieldTypeString", "alias": "NRS_PA", "length": 5, "domain": null }, { "name": "GAZ_AREA", "type": "esriFieldTypeDouble", "alias": "GAZ_AREA", "domain": null }, { "name": "GIS_AREA", "type": "esriFieldTypeDouble", "alias": "GIS_AREA", "domain": null }, { "name": "REPT_AREA", "type": "esriFieldTypeDouble", "alias": "REPT_AREA", "domain": null }, { "name": "GAZ_DATE", "type": "esriFieldTypeDate", "alias": "GAZ_DATE", "length": 8, "domain": null }, { "name": "LATEST_GAZ", "type": "esriFieldTypeDate", "alias": "LATEST_GAZ", "length": 8, "domain": null }, { "name": "STATE", "type": "esriFieldTypeString", "alias": "STATE", "length": 4, "domain": null }, { "name": "AUTHORITY", "type": "esriFieldTypeString", "alias": "AUTHORITY", "length": 15, "domain": null }, { "name": "DATASOURCE", "type": "esriFieldTypeString", "alias": "DATASOURCE", "length": 20, "domain": null }, { "name": "GOVERNANCE", "type": "esriFieldTypeString", "alias": "GOVERNANCE", "length": 15, "domain": null }, { "name": "COMMENTS", "type": "esriFieldTypeString", "alias": "COMMENTS", "length": 120, "domain": null }, { "name": "ENVIRON", "type": "esriFieldTypeString", "alias": "ENVIRON", "length": 3, "domain": null }, { "name": "X_COORD", "type": "esriFieldTypeDouble", "alias": "X_COORD", "domain": null }, { "name": "Y_COORD", "type": "esriFieldTypeDouble", "alias": "Y_COORD", "domain": null }, { "name": "MGT_PLAN", "type": "esriFieldTypeString", "alias": "MGT_PLAN", "length": 3, "domain": null }, { "name": "RES_NUMBER", "type": "esriFieldTypeString", "alias": "RES_NUMBER", "length": 15, "domain": null } ], "geometryField": { "name": "SHAPE", "type": "esriFieldTypeGeometry", "alias": "Shape" }, "indexes": [ { "name": "FDO_OBJECTID", "fields": "OBJECTID", "isAscending": true, "isUnique": true, "description": "" }, { "name": "FDO_SHAPE", "fields": "SHAPE", "isAscending": true, "isUnique": false, "description": "" } ], "subtypes": [], "relationships": [], "canModifyLayer": true, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query,Data", "maxRecordCount": 10000, "supportsStatistics": true, "supportsExceedsLimitStatistics": true, "supportsAdvancedQueries": true, "supportedQueryFormats": "JSON, geoJSON, PBF", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "supportedSpatialRelationships": [ "esriSpatialRelIntersects", "esriSpatialRelContains", "esriSpatialRelCrosses", "esriSpatialRelEnvelopeIntersects", "esriSpatialRelIndexIntersects", "esriSpatialRelOverlaps", "esriSpatialRelTouches", "esriSpatialRelWithin", "esriSpatialRelRelation" ], "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": true, "supportsPercentileStatistics": true, "supportsHavingClause": true, "supportsOrderBy": true, "supportsDistinct": true, "supportsCountDistinct": true, "supportsPagination": true, "supportsLod": false, "supportsQueryWithLodSR": false, "supportsTrueCurve": true, "supportsQueryWithDatumTransformation": true, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": true, "supportsTimeRelation": true, "supportsSqlFormat": false, "supportsQueryAnalytic": false }, "supportsDatumTransformation": true, "dateFieldsTimeReference": null, "preferredTimeReference": null, "datesInUnknownTimezone": false, "hasGeometryProperties": true, "geometryProperties": { "shapeAreaFieldName": "SHAPE_Area", "shapeLengthFieldName": "SHAPE_Length", "units": "esriDecimalDegrees" }, "hasMetadata": false, "isDataArchived": false, "archivingInfo": { "supportsQueryWithHistoricMoment": false, "startArchivingMoment": -1 }, "supportsCoordinatesQuantization": true, "supportsDynamicLegends": true } ], "tables": [] }